Subscription Status

Supporting Member : No
Pro Supp. Member : No

Join & Become a Member
Supporting Memberships

Our Local Sponsors


Forum Links

CTGUNTALK.COM Forum Links
  1. CT AWB / LCM FAQ
  2. CT Shooting Range Info
  3. CT Gun Shops


Like & Follow us on :

Author Topic: Glock 43  (Read 223 times)

0 Members and 1 Guest are viewing this topic.

Online Bottom Rung

  • Forum Contributor Pro
  • Trade Count: (+2)
  • Highly Active Member
  • ***
  • Join Date: Jun 2014
  • Posts: 570
  • Thanked: 16 times
  • PROTECT the 2nd!
  • Referrals: 1
Re: Glock 43
« Reply #11 on: March 08, 2019, 08:39:24 AM »
Usually if the gun is going off, the center trigger safety fails or the trigger bar has been screwed with.  Some of the aftermarket trigger bar manufacturers do not have the correct geometry.  Plus some folks seem bent on messing with the firing pin block plunger which isn’t good.

SSVI uses a factory Glock trigger bar with their trigger. All you’re really paying for is a sweet looking trigger shoe that changes the geometry of your finger to trigger interface. The factory trigger bar leaves the factory engineered specs in place to do what they are intended.

Online imahangtia

  • Trade Count: (0)
  • Highly Active Member
  • *****
  • Join Date: Mar 2013
  • Posts: 11970
  • Thanked: 92 times
  • NEVER FORGIVE SB-1160
  • Referrals: 1
Re: Glock 43
« Reply #12 on: March 08, 2019, 09:02:07 AM »
These never get old for me.



You are not allowed to view links. Register or Login





You are not allowed to view links. Register or Login




Online Masked

  • Supporting Vendor
  • Trade Count: (+3)
  • Highly Active Member
  • ***
  • Join Date: Dec 2012
  • Posts: 1341
  • Thanked: 14 times
  • Sup.
  • Referrals: 0
Re: Glock 43
« Reply #13 on: March 08, 2019, 10:43:19 AM »
I've put probably 10,000 rounds down my G43 at this point - I've had an Overwatch for about 8k of them...It's what I would recommend.

Per the drop test, I've had the Zev go off and an Agency but, there were also - connectors so, that's actually understandable.

As for the Glock going off when hit, there's a combination of things that have to happen - Trigger bar / Connector / Aftermarket plunger...Just changing one of them isn't going to cause a ND, it takes 2 or 3.